单模聚焦微波辅助合成1-乙基-3-羧甲基咪唑四氟硼酸盐离子液体

以1-乙基咪唑为原料,采用discover环形单模聚焦微波合成仪合成了1-乙基-3-羧甲基咪唑四氟硼酸盐离子液体,对产品结构进行了表征及热性分析,并测定了粘度、密度、表面张力、电化学窗口等物化性能,同时考察了合成离子液体对淀粉的溶解性能.结果表明,单模聚焦微波辐射合成具有速度快、时间短、反应条件温和等优点,产品产率为88.23％,其密度、粘度、表面张力与温度均呈线性关系,且随温度升高而减小.与水溶剂相比,合成的离子液体对可溶性淀粉具有较高的溶解度,为淀粉及其衍生物的均相衍生化反应提供了理论基础.     

微波水解衍生高效液相色谱法测定饲料中的氨基酸

建立了一种微波水解衍生高效液相色谱同时测定饲料中17种氨基酸含量的方法。采用2,4-二硝基氯苯作为柱前衍生试剂,利用C_(18)色谱柱分离。二极管阵列检测器进行检测,检测波长为360 nm,并对微波水解时间及温度进行优化。17种氨基酸在2.5~50 mg/L范围内呈良好线性关系,相关系数为0.990 7~0.999 9;相对标准偏差为0.88%~4.2%;加标回收率为90.6%~107.2%;检出限为0.15~2.37 mg/L。研究结果表明,150℃下微波水解16 min的结果与传统加热水解(110℃,24 h)的效果基本相同。该方法分析时间较短,灵敏度较高,可用于饲料中氨基酸含量的检测。     

微波消解-ICP-OES法测定哈氏C-276合金中Cr、Fe、Mo、W元素

建立了微波消解-电感耦合等离子体发射光谱法同时测定哈氏C-276合金中Cr、Fe、Mo、W元素含量的分析方法.采用10 m L HCl-HNO3-HF(体积比为10:1:1)混合酸溶解试样.研究了合金不同溶解方式、元素谱线的选择、背景校正等试验条件,并对仪器分析参数进行了优化,确定了最佳的试验条件,各元素分析谱线依次为Cr2 67.716 nm、Fe 238.204 nm、Mo 202.031 nm、W 209.712 nm,建立的校准曲线各元素相关系数均在0.999 5以上.实际样品分析中,加标回收率为97.8%~102.7%,重复测定结果的相对标准偏差小于1.64%(n=6),试验测定结果与镍基标准样品标准值做对照,结果表明方法准确、快速,能够满足日常生产的检测要求.     

微波消解–石墨炉原子吸收光谱法测定空气中碲

建立微波消解–石墨炉原子吸收光谱法测定空气中的碲。采用微孔滤膜收集样品,以硝酸–双氧水混合体系微波消解滤膜,氯化钯为基体改进剂,在优化的仪器工作条件下测定。碲的质量浓度在0~15μg/L范围内与吸光度线性关系良好,相关系数为0.999 5,方法检出限为0.14μg/L。样品加标回收率在95.6%~104.0%之间,测定结果的相对标准偏差为1.15~1.37%(n=7)。该方法操作简单、灵敏度高,适用于空气中微量碲的测定。     

Characterization and study of microwave activation effects on the polystyrene tacticity

¹³C Nuclear magnetic resonance proved to be an advantageous tool to determine the stereoregularity of polystyrene polymers. The latter was achieved through the analysis of the signal of the quaternary carbon and that of the carbon-p in the aromatic ring too. Styrene was polymerized through microwaves and conventional heating activation using two different polymerization techniques: emulsion and bulk. Microwave activation was performed in a mono-modal type device under the following experimental conditions: various initiator concentrations, an average irradiation power of 50?W, temperature of 70°C, and using a batch reactor for emulsion and bulk experiments. The results obtained in these experiments were compared with those obtained by conventional heating activation polymerization under the same initiator concentration and temperature conditions. Microwave-activated reactions resulted in shorter reaction times and higher yields. The tacticity of the polymer samples was not significantly altered, which lead to the conclusion that, in this case, the stereoregularity of polystyrene was not influenced by microwave irradiation.     

ZnCl_2溶液中微波辅助SnCl_4催化纤维素制备5-HMF

将纤维素溶解在ZnCl_2溶液中,以SnCl_4为催化剂,微波下使纤维素降解成5-羟甲基糠醛(5-HMF)。实验考察了微波功率、纤维素的质量、ZnCl_2溶液浓度、反应时间及催化剂与纤维素物质的量比等对5-HMF产率的影响。结果表明,以SnCl_4为催化剂,在优化条件:1.0 g纤维素溶解在100 m L 70%ZnCl_2溶液中,微波功率为420 W,降解反应9 min,SnCl_4与纤维素物质的量比2∶1下,5-HMF的产率达到39.4%。     

Electrostatic contribution to the ion solvation energy: cavity effects

Ion solvation process has been analysed for the spherically symmetrical system where an ion is located inside a cavity surrounded by an isotropic nonlocal dielectric medium. It has been proven that for any dielectric properties of the medium, the electric field outside the cavity as well as the ion solvation energy depend only on the total ion charge but not of the particular distribution of the ion charge density inside the cavity. These characteristics remain unchanged if the charge is displaced from the external boundary of the cavity into it. Analytical formulas for them have been derived for a particular model of the nonlocal dielectric function. Comparison of results for the solvation energy on the basis of this new theory and of the conventional approach (disregarding the existence of the cavity) shows a significant difference between their predictions if the ion charge is displaced inside the ion cavity.     

pyMolDyn: Identification,structure, and properties of cavities/vacancies in condensed matter and molecules

pyMolDyn is an interactive viewer of atomic systems defined in a unit cell and is particularly useful for crystalline and amorphous materials. It identifies and visualizes cavities (vacancies, voids) in simulation cells corresponding to all seven 3D Bravais lattices, makes no assumptions about cavity shapes, allows for atoms of different size, and locates the cavity centers (the centers of the largest spheres not including an atom center). We define three types of cavity and develop a method based on the split and merge algorithm to calculate all three. The visualization of the cavities uses the marching cubes algorithm. The program allows one to calculate and export pair distribution functions (between atoms and/or cavities), as well as bonding and dihedral angles, cavity volumes and surface areas, and measures of cavity shapes, including asphericity, acylindricity, and relative shape anisotropy. The open source Python program is based on GR framework and GR3 routines and can be used to generate high resolution graphics and videos. © 2016 Wiley Periodicals, Inc.     

Microwave-assisted one-pot conversion from deoiled asphalt to green fluorescent graphene quantum dots and their interfacial properties

High-quality graphene quantum dots (GQDs) were prepared through a facile route of microwave-assisted one-step mild oxidation of cheap deoiled asphalt (DOA). The as-prepared DOA-derived GQDs dissolved in water with a much smaller and thinner size than most of the reported GQDs, and luminesced bright green light by excitation of 365 nm. Furthermore, the GQDs possessed excellent properties of excitation-tuned fluorescence behavior with a high quantum yield up to 16.4%. In addition, the GQDs showed amphipathic properties and could significantly reduce the interfacial tension, which give them great potential as surfactants for asphalt emulsion.     

Microwave‐assisted extraction versus Soxhlet extraction to determine triterpene acids in olive skins

Microwave‐assisted extraction is compared with a more classical technique, Soxhlet extraction, to determine the content of triterpene acids in olive skins. The samples used in their original unmilled state and milled were extracted with ethyl acetate or methanol as solvents. The optimized operating conditions (e.g., amount and type of solvent, and time and temperature of extractions) to attain the better extraction yields have been established. For the identification and quantitation of the target compounds, an ultra high performance liquid chromatography with tandem mass spectrometry method was employed. The best results were achieved using the microwave‐assisted extraction technique, which was much faster than the Soxhlet extraction method, and showed higher efficiency in the extraction of the triterpenic acids (oleanolic and maslinic).